Offset-litho problems - linting, ink drags or vibrations

Dentado ? Filigrana ? Fosforescencia ?
Tipos de impresiones ? Tintas ?

Hablemos aquí­ de esto.
Responder
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Offset-litho problems - linting, ink drags or vibrations

Mensaje por Rein »

We met in another thread the problem of Linting. Normando was so observant to point this phenomenon out to us!
In the offset printing of newsprint, linting is described as the tendency of paper to shed loosely bound fibres and fines during printing.[1] This material subsequently adheres to the offset printing blanket and disrupts the transfer of ink from the inking system to the blanket. The result is a deterioration of print quality to the point where the press must be stopped and cleaned.[2]
Thus it looks like a gradual process in which the print may be good at first, but deteriorate later - yielding to more and more white fibres!!!

The other problem we dealt with during recent discussions was the origin of the so-called "double print".

And the third problem - not much discussed here - is the spread of fine coloured dots all over the stamp!

Several problems may occur at the same time - linting and vibration:

Imagen
Imagen

linting and vibration:

Imagen
Imagen


Dust fog:


Imagen
Imagen

We may wonder why in the above cases of linting plus "double prints" the white fibres had NOT been DOUBLED! In my opnion we are NOT dealing really with a double print but with INK DRAG !

GOOGLE:

Nos conocimos en otro hilo del problema de la pelusa. Normando era tan atento a punto de este fenómeno a nosotros!
En la impresión offset de papel prensa, deshilachado se describe como la tendencia de papel deje fibras débilmente ligado y multas durante la impresión. [1] Este material, posteriormente se adhiere a las mantillas de impresión offset y altera la transferencia de la tinta del sistema de tinta a la manta . El resultado es un deterioro de la calidad de impresión hasta el punto que la prensa debe ser detenido y limpiado. [2]
Así se ve como un proceso gradual en el que la impresión puede ser buena al principio, pero se deterioran más tarde - a la obtención de más y más fibras blancas!

El otro problema que hemos tratado durante los recientes debates fue el origen de la llamada "impresión doble".

Y el tercer problema - no muy discutido aquí - es la propagación de la multa de puntos de colores en todo el sello!

Pueden presentar diversos problemas al mismo tiempo - deshilachado y las vibraciones :

deshilachado y vibraciones:

De niebla de polvo:

Podemos preguntarnos por qué en los casos anteriores de pelusas y más "imprime a doble" de las fibras blancas no había sido duplicado! En mi opnion no estamos tratando realmente con una impresión doble, pero con ARRASTRE DE TINTA!
Avatar de Usuario
Rein
Usuario Colaborador
Usuario Colaborador
Mensajes: 6258
Registrado: 13 Mar 2009 15:59
Ubicación: Leiden, Netherlands
Contactar:

Re: Offset-litho problems - linting, ink drags or vibrations

Mensaje por Rein »

Why should a stamp with an assumed double impression be more interesting philatelistically and demand a catalogue status rather than stamps with one or more of the other phenomenons????

Imagen

Imagen

GOOGLE:

¿Por qué un sello con una doble impresión supone ser más interesante filatelisticamente y la demanda de un prestigio catálogo en lugar de sellos con uno o más de los otros fenómenos????
Responder

Volver a “Caracterí­sticas de los Sellos Postales”